The Stic-Tite Arrow Holder is a new model arrow holder with an old style function. We built this holder to accommodate the many different sized risers found on today’s and yesterdays bows. The large size (2 1/2″) Stic-Tite fits many of the older model recurves with the deeper risers. The small sized (2″) Stic-Tite fits many of the narrow depth longbows and or selfbows. The Medium size will of course fit any of the riser sizes in between.
The Stic-Tite holder is made from UV resistant urethane having a natural non-glare finish. The Stic-Tite has a pair of “pinch ears” to help open the jaws a bit while you push/slide it on your arrow. Unlike most holders, Stic-Tite can be applied freely out in front with one hand and then rotated into position and stuck in place. Remove it when your finished hunting for the year and store it until next season.. No longer will your bow be cluttered up with a non-removable arrow holder all year long. The Stic-Tite utilizes industrial strength low profile Velcro. The male portion is glued onto the Stic-Tite with a special adhesive to give the Velcro that added adhesion for a long lasting bond that is very strong. The female or soft part of the Velcro is attached to the riser for a non-obtrusive attachment to your bow. Stic-Tite has a small pull tab to help with removal. Velcro can be purchased most anywhere if repairs are necessary sometime down the road. If you prefer, you can purchase additional Velcro and custom cut your soft side into a design of your choice, like an arrowhead for example.
Watch the YouTube clip below for installation instructions and to see it in action….